SE-1200 Series Electrocardiograph User Manual Introduction
- 19 -
WARNING
1. Accessory
equipment
connected to the analog and digital interfaces must be certified
according to the respective IEC/EN standards (e.g. IEC/EN 60950 for data
processing equipment and IEC/EN 60601-1 for medical equipment). Furthermore all
configurations shall comply with the valid version of the standard IEC/EN 60601-1-1.
Therefore anybody, who connects additional equipment to the signal input or output
connector to configure a medical system, must make sure that it complies with the
requirements of the valid version of the system standard IEC/EN 60601-1-1. If in
doubt, consult our technical service department or your local distributor.
2. If multiple instruments are connected to a patient, the sum of the leakage currents
may exceed the limits given in the IEC/EN 60601-1 and may pose a safety hazard.
Consult your service personnel.
2.6 Bottom Panel
Figure 2-8 SE-1200 Express/SE-1200 Bottom Panel
Name
Explanation
A
Speaker Hole
Path for sound from speaker
B
Battery Compartment
Compartment for battery
C
Fuse
The specification is: T3.15AH250V, Ø5×20mm;
T1AL250VP, Ø5×20mm (for UL device)
D
Heat Emission Hole
Path for internal heat emission
B
C
E
A
D
D
理邦保密文件
EDAN CONFIDENTIAL
Содержание SE-1200 Series
Страница 2: ...E D A N C O N F I D E N T I A L...
Страница 139: ...131 E D A N C O N F I D E N T I A L...