SE-1200 Series Electrocardiograph User Manual Managing Orders
- 69 -
Chapter 8 Managing Orders
NOTE:
To use the order function, the ECG data management software (DMS) of the
manufacturer must be installed in the PC.
8.1 Loading Orders
Before loading orders, please configure the
Order Setup
screen. For details, please refer to
Section 8.5 “Setting Orders”.
Operation procedures are as follows:
1.
Connect the electrocardiograph to the PC installed with the DMS by using an Ethernet cable
recommended by the manufacturer.
2.
Set
Remote IP
,
Local IP
,
Gateway
and
Subnet Mask
in the
Transmission Setup
window.
For details, please refer to Section 10.6 “Transmission Setup”.
3.
Select
Load
on the
Order Manager
screen to load orders from the DMS, and then a hint will
be displayed as follows.
NOTE:
If orders are modified on the DMS, the corresponding orders displayed on
the
Order Manager
screen will be refreshed after you load orders from the
software.
4.
If you select
Exam.Room Filter
on the
Order Setup
screen, orders will be filtered after you
press
Load
.
For details, please refer to Section 8.5 “Setting Orders”.
5.
If 200 orders already exist on the
Order Manager
screen, the following hint pops up after
you press
Load
.
理邦保密文件
EDAN CONFIDENTIAL
Содержание SE-1200 Series
Страница 2: ...E D A N C O N F I D E N T I A L...
Страница 139: ...131 E D A N C O N F I D E N T I A L...
