EDAN Acclarix AX4 Скачать руководство пользователя страница 17

Страница: 17 / 151

Acclarix AX4 Diagnostic Ultrasound System User Manual

Safety

- 10 -



Anti-virus measures such as USB device virus scanning should be carried out

prior to using the USB flash drive.



Do not connect an USB device with unknown provenance to the ultrasound

system.



When the ultrasound system is returned for maintenance, disposed of, or removed

from the medical institution for other reasons, ensure all patient data are removed
from the ultrasound system.

NOTE:

The pictures and interfaces in this manual are for reference only.

Federal Communications Commission (FCC) Statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:



This device may not cause harmful interference, and



This device must accept any interference received, including interference that
may cause undesired operation.

Содержание Acclarix AX4
























































































































































Результаты поиска

Содержание Acclarix AX4

Отзывы:

Бренды по названию

Популярные бренды

EDAN Acclarix AX4, Руководство пользователя

Результаты поиска

Содержание Acclarix AX4

Отзывы:

Бренды по названию

Популярные бренды