EDAN Acclarix AX4, Руководство пользователя

Страница: 115 / 151

Acclarix AX4 Diagnostic Ultrasound System User Manual Presets
- 108 -

Report Logo
The system supports a user-defined report header by importing a logo and setting the logo’s
position and size.
Report logo settings are as follows:

Import: import a bmp format logo from USB disk.

Delete: delete the imported logo.

Logo Position: set the logo position to locating at the left or right side of report header.

Logo Size: set the logo size to Small or Large.

OB Settings
The system supports the following OB measurement settings:

Fetal Age: select the author / measurement options for Fetal age calculation.

Fetal Growth: select the author / measurement options for Fetal Growth calculation.

Estimated Fetus Weight: select an equation for the Estimated Fetus Weight calculation.

Growth Curves Display: set single or quad curves as the default display format for the
Growth Curves.

Default GA display: set the CUA (Composite Ultrasound Age) or AUA (Average
Ultrasound Age) as a default result displayed in the worksheet.

Cardiac Settings
The system supports following Cardiac measurement settings:

HR Cycle : set the number of heartbeats that are assumed in the HR or FHR
measurement calculation. Range: 1-8.

EDV/ESV : set the author of the formula that is used in EDV/ESV calculation. There
are three options: Teichholz, Gibson and Cube.

Suppress Measurement on Unfreeze
If this option is enabled the Measure function goes away when the system is unfrozen, and
comes back again with the next freeze. Manually exiting the function causes it to remain
inactive until manually activated.