manualshive.com logo in svg

ECR International Dunkirk DCB-100, Инструкция по установке, эксплуатации и обслуживанию

Поделиться
Скачать
ECR International Dunkirk DCB-100 Скачать руководство пользователя страница 44

40 

7 - GAS SUPPLY PIPING

7.2 Gas Pipe Recommendations

Configure gas pipe for proper operation and avoid issues 

with failure to light or maintenance of proper flame during 

operation, which could cause error codes related to flame 

signal.

• 

Incoming pipe size and pressures shall be sufficient for 

all gas appliances in the building. See Chart next page or 

reference NFPA-54.

• 

Use only properly rated and certified materials for gas pipe.

•  Use of Schedule 40 metallic pipe and Corrugated Stainless-

Steel Tubing (CSST) is manufacturer recommended for 

best performance.

• 

Use of Gas Appliance Connectors (flexible connectors 

typically used for gas stoves or water heaters) is 

prohibited. Refer to national and local building codes.

• 

Each fitting in the gas supply pipe shall count as 5 

equivalent feet.

• 

There shall be sufficient gas pressure at the boiler per gas 

used and appliance rating plate.

•  For LP applications there shall be no less than 10 linear 

feet of properly sized gas pipe excluding fittings from the 

closest regulator or meter in the gas supply piping.

ACCEPTABLE PIPING FOR 

PROPANE

240013501 REV A [03/15/2022]

Содержание Dunkirk DCB-100
















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды