INSTALLATION, OPERATION AND MAINTENANCE MANUAL
Pellet boiler Bisolid OM-PBBV02/07/2017/EN
33
Figure 5.11. Description of electrical connectors mounted on the rear side of the
boiler’s cover.
The manometer
serves to indicate the pressure of the circulations water in the
boiler’s heat exchanger. The manometer is positioned at the top left corner of
the heat exchanger’s front panel.
5.4.11.
MOUNTING OF THE FUEL TRANSPORT AUGER TO THE BURNER
The fuel transport auger has to be mounted in accordance to the requirements presented in
the manual for operation, installation and maintenance of pellet burner from series Bisolid GP
xx_B hc>.
Switch “START”
Communication
connector
Pellet burner connector
Emergency thermostat
Electrical fuse
Power supply connector
Switch “POWER”
Room thermostat
connector
