Ecotherm Bisolid 18, Инструкция по установке, эксплуатации и обслуживанию

Страница: 12 / 52

INSTALLATION, OPERATION AND MAINTENANCE MANUAL
Pellet boiler Bisolid OM-PBBV02/07/2017/EN 12
Table 4.2. Technical data for hot water pellet boiler from series Bisolid.
PARAMETER DIMENSION VALUE
Hot water pellet boiler model
-
Bisolid 18 Bisolid 25 Bisolid 30
Boiler weight kg 192 212 222
Boiler water volume dm³ 44 50 60
Overall
dimensions of
the system:
W
х D х H
W1- Length of
boiler body
mm
580 580 580
W – Length
with pellet
burner
954 954 954
D - Depth
770 770 770
H -Height
885 965 1044
Boiler class - 5
Operation water overpressure in
the boiler
bar 2.5
Boiler test overpressure bar 4
Recommended operation water
temperature in the boiler
ºC 80
Minimum boiler inlet water
temperature
ºC 60
Chimney draught * Pa 12-15*
Connection
pipes Inlet/outlet water
G 1½”
Flue outlet
mm 149
Power supply voltage - L1, N, PE, 50Hz; 230V АС ;
Electrical consumption (with
ignition)
W <100
+1100
System electrical protection - IP20
* If the chimney draught operation parameters are lower than the above presented values it
is necessary to install flue gas extraction fan.
The selection, installation and connection to the flue gas extraction fan have to
be made by the technically trained and qualified person.
The technical parameters of hot water solid fuel boilers series Bisolid according to the
delegated Regulation (EU) 2015/1187 are presented in Table 4.3.