Dendrometer Data Logger DL18
4
Select measuring function
Adapter Cable, Cable-2.5-Stereo (0-2.5 Volts DC)
(fig. 6)
Fig. 6 Measuring mode for dendrometer:
Cable-2.5-Stereo (0-2.5 Volts DC
)
Select
Logging Interval
and other parameters
Fig. 7 A typical configuration for 4 dendrometers without Scaling (LCD units V)
Click
Delayed Start
for Lauching Logger.
7. Data conversion
The measured data with previous configuration (fig. 7) are in units of volts. For
dendrometers there are 2 ways to convert the raw data in micrometer: With your
personal computer or with the scaling function of the data logger.
Data conversion with personal computer
The raw dendrometer data from the logger has the unit Volt. You get micrometers values
by using the following formula: