Instructions for Use:
Brand Name of Product
TEMP-WiFi-TP
Generic Name of Product
Wifi temperature data logger
Product Code Number(s)
TEMP-WiFi-TP
Purpose of Product
This device measures the temperature of baths in which it is situated and transmits data to a
PC via WiFi. Temperature is monitored in real time on a large and easy to read display.
This device also allows management to record, track and document the temperature
reprocessing baths from their office PC.
Range of Applications for Product
Ultrasonic cleaners, pre-cleaning sinks, soaking trays, disinfecting solutions.
Key specifications of product
Theromologger
Mounting Bracket
Waterproof Probe
Software Installation USB Stick
Runs on 802.11b compatible networks
Shipping & Storage
Shipping Conditions & Requirements
Storage Conditions
Packaging Conditions
Shelf Life
Instructions for Using Product
Description of Use (s)
This device measures the temperature of baths in which it is situated and transmits data to a
PC via WiFi.
Preparation for Use
1.
Plug the temperature probe into the thermologger.
2.
Your sensor is already reading the temperature, but it will not be configured or
connected to your WiFi network until you complete the product set-up.
3.
Your sensor is set-up using the included software package called EL-WiFi which is
available on the supplied USB stick.
4.
Plug the supplied USB install stick in an open USB slot on your PC. Two folders will
be on the USB stick.
5.
Select the “Temp-WiFi” folder when installing software. (Temp-DL is a software for
another product and will not work with the Temp-WiFi-TH)
6.
Your sensor will arrive partly charged, but ideally you should charge it for 24 hours
before use for optimum performance.
7.
To charge, connect the supplied USB cable to the data logger and your PC. Charging
will begin automatically.
Diagrams (drawings, pictures):
USE THESE PICTURES ALONG WITH THE NUMBERED STEPS BELOW FOR
ACCURATE SET UP
1.
