Ecom i.roc Ci70-Ex Скачать руководство пользователя

Страница: 7 / 39

Insert the top end of a fully charged battery into the computer, and press down

firmly on the bottom of the battery. Then tighten the screw. Make sure that the

battery is firmly attached.

About Battery Status

Use the battery icon on the Title bar to see the power status of your battery� If you want

more detailed information on your battery such as usage time or voltage, use the In-

termec Dashboard� For more information on the Dashboard see “About the Intermec

Dashboard” on page 57�

Understanding the Battery Icon Status

Battery Icon Status

Battery is fully charged�

Battery has a high charge�

Battery has a medium charge� You should be able to work for several more

hours before changing batteries�

Battery is low� You need to charge or replace the battery soon�

Battery is critically low� You need to replace the battery now�

Battery is charging�

The battery is not installed�

You can also use the battery status LED to see the charging status of your battery�

Battery status LED

Battery status LED

Understanding the Battery Status LED

LED State

Description

Steady green

The computer is connected to a charger and the battery is

more than 95% charged�

Blinking red

The battery is very low� The computer will soon go into Sus-

pend mode� Charge or replace the battery�

Steady red

The computer is connected to a charger and the battery is

charging�

Blinking red-

amber

The battery charging system has encountered an error� The

battery is not charging�

Steady amber

The battery is outside of the allowable charging temperature

range� Charging will resume when the battery temperature is

back in the acceptable range of 5 °C to 35 °C (41 °F to 95 °F)�

Off

The computer is not on external power and the battery is

operating normally�

About Battery Life and Conservation

Batteries that are stored outside the computer for long periods of time slowly dis-

charge� ecom instruments recommends storing the battery in a charger to maintain

battery performance�

Battery Conservation Tips

When You Want To:

Do This to Save Battery Power:

Use the computer

and the Low Battery

status icon appears

or the Battery light

comes on�

• Connect the computer to an external power source.

• Or, save your data and press the Power button and select

Shutdown� After the computer turns off, remove the battery

and insert a fully charged battery�

Stop using the com-

puter for 5 minutes

or longer�

Make sure that the low battery icon is not on the screen

and the Battery LED is not on� Press the Power button and

choose Suspend to suspend the computer�

Содержание i.roc Ci70-Ex








































Результаты поиска

Содержание i.roc Ci70-Ex

Отзывы:

Похожие инструкции для i.roc Ci70-Ex

Бренды по названию

Популярные бренды

Ecom i.roc Ci70-Ex, Руководство пользователя

Результаты поиска

Содержание i.roc Ci70-Ex

Отзывы:

Похожие инструкции для i.roc Ci70-Ex

Бренды по названию

Популярные бренды