38
39
Device Monitor Menu
Device Monitor Options
Parameters You Can Configure
Device Health Controls
• Enable health data collection
• Enable device health appication
• Enable blue light (LED)
• Set rule file location
• Set data refresh periods
Device Health Secreen Captures
Device health sceeen capture settings (di-
rectory and screen capture allowed)
Disabled Executables
None (read-only)
Device Wipe
Device wipe settings (enable wipe and
interval)
License Manager Menu
License Manager Options
Parameters You Can Configure
About
About settings (read-only)
License Vault
None (displays applications that are
licensed)
Head Module settings
• Enable Modules
• Setup Modules
Virtual Wedge Menu
Virtual Wedge Options
Parameters You Can Configure
Enable Virtual Wedge
Enable virtual wedge
Virtual Wege Method
Set virtual wedge method
Barcode Scanner Wedge
Bar code scanner wedge settings (bar code
scanner grid and label encoding)
Magstripe Reader Wedge
Magstripe Reader Grid
Location Services Menu
Location Services Options
Parameters You Can Configure
Server
Server settings (port and anable server)
Virtual GPS
Virtual GPS settings
Navigate in Intermec Settings
You can easily navigate through the screens in Intermec Settings to find the parameter
you need to configure.
To move down a level in Intermec Settings:
• Tap the menu item in the list.
To move back a level in Intermec Settings:
• Tap Back or Cancel on the Tile bar.
To save a parameter setting:
• Tap OK.
To exit Intermec Settings:
• Tap Menu > Exit or OK.
Configure Profile Settings With Intermec Settings
A profile is a set of predefined values that you can easily apply to the computer to ensure
optimal performance in a specific scenario. The end user does not need to figure out
the right” settings because we have already done that work for you. Profile Settings
is available from the Start menu so you can make it available to the end user for easy
configuration. Use Intermec Settings to determine the profiles you want the end user to
see in the Profile Settings application.
1 Go to Device Settings > Profile Settings Application.
2 Select Power or Scanning�
3 From the Camera, Power, or Scanning submenu, check or clear the Display
check box for the settings you want to have available to the end user�
4 Click OK to save your selection�
Restore Default Settings
You can easily restore a menu to its default settings or all of the
Intermec Settings parameters to their default settings if necessary�
1 Navigate to the menu that you want to restore to defaults�
2 Tap Menu > Restore Menu Defaults�
3 When prompted, tap Yes to restore the menu default settings�
4 If prompted to refresh the computer, tap Yes�
You can restore defaults settings for all parameters�
1 Tap Menu > Restore All Defaults� The applications asks if you are sure you
want to restore all defaults�
2 Tap Yes�
After several minutes, all of the default settings are restored�
Hide Menu Items in Intermec Settings
You can hide items in the Intermec Settings menus if you do not want to have them
available for other users to access� Hidden items are not saved when you back up your
settings in the SmartSystems console�
On the mobile computer, you can:
• hide menu items by tapping and holding the item, and then choosing Hide
Menu Item from the popup list� When asked if you want to hide the menu, tap Yes�
• restore all hidden items in all menus, by tapping Menu > Unhide All Items.