10
11
About the Status LEDs
Use the following illustrations and table to understand the status LEDs on your com-
puter� All six status LEDS are not available on every i�roc
®
Ci70 -Ex computer� For ex-
ample, the QWERTY versions of the i�roc
®
Ci70 -Ex do not have a green key status LED�
Location of the i.roc
®
Ci70 -Ex Status LEDs
Green key
status LED
Shift key
status LED
Orange key
status LED
Battery status LED
Notification LED
Good Read and Ready-to-Work
Status LED
Status LED Descriptions
LED
Color
Description
Notification
Amber
This LED is user-programmable
Good Read
Green
The computer successfully decoded a bar code�
Ready-to-Work
Blue
If you have Intermec Terminal Emulator (ITE), the application is running
and connected to the host�
If you do not have ITE, you can configure the Ready-to-Work indicator to
turn on or off to indicate a healthy state�
Blinking
blue
ITE is running but not connected to the host�
The computer is unhealthy�
Off
ITE is not installed or not running�
The computer is healthy�
Battery
See “About Battery Status” on page 12�
Key Status
Green
The Green function key is enabled�
Orange
The Orange function key is enabled�
Shift
Red
The Shift key is enabled�
About Language Provisioning
If your i�roc® Ci70 -Ex computer includes language provisioning, you are prompted to
select a language provision when the computer starts for the first time. It may take up
to 15 minutes to load your language�
Make sure you select the correct language before you tap Provision� If you need to have
the language provisioning changed, you will need to send your computer to an ecom
instruments Global Repair Center�
About the Battery
L
The computer uses following rechargeable Lithium-ion battery pack as the main power
source:
• 3.7 V, 4000 mAH (14.8 Wh) battery AM Ci70 -Ex
L
The battery used in this device may present a fire or chemical burn hazard if it is mis-
treated� Do not disassemble it, heat it above 60 °C (140 °F) or incinerate it� Dispose of
used batteries promptly� Keep away from children�
Charge the Battery
You need to fully charge the battery before using your computer for the first time.
Change the Battery
If your battery power is low, you need to either charge the battery in the computer, or
replace it with a charged battery�
1
Save your files and close any open applications.
2
Press the Power button and choose Shutdown from the menu to shut down
the computer�
3
Detach the handstrap from the computer�
Detaching the Handstrap from an i.roc
®
Ci70 -Ex
4
Make sure the computer is in standby mode and that the screen has turned off�
5
Remove the battery�
Unscrew the battery‘s screw using enclosed screwdriver� Lift lower part of the
battery to release it from the computer�