background image

28

29

About the optional WWAN Module

The i�roc

®

 Ci70 -Ex mobile computer supports two types of cellular technology:

•    CDMA

•    UMTS

Note:

Your Flexible Network Radio mobile computer supports both CDMA and UMTS tech-

nology� Your Flexible Network Radio does not support Network Information and Time 

Zone (NITZ) messages to automatically set the system time�

Cellular features on the computer include data connectivity� You can also use a Blue-

tooth headset or hands-free kit for voice over IP (VoIP) applications� 

After you turn on the WWAN module and activate service with your wireless carrier, you 

can customize the WWAN features and network settings� 

Activate the UMTS Module

You use a SIM card to activate the UMTS WWAN module on your computer� You can 

purchase the SIM card from your network provider�

 

1 Press the Power button to turn off the computer�

 

2 Unscrew the battery’s screw using a torx scredriver� Lift lower part of the 

 

   battery to release it from the computer�

3  Remove the four Phillips screws

and open the card access door�

5  Slide the SIM card into the slot

in the card access door�

4  Slide the SIM card door to the

left to unlock it and open the door�

6  Close the SIM card door and slide

it to the right to lock it in place�

 

7 Close the card access door� Then release cover plate and fasten the 

 

   four screws�

 

8 Install the battery. Press down firmly on the bottom of the battery. 

 

   Then tighten the torx screw�

 

9 Press the Power button� The computer cold boots�

Activate the CDMA Module

To activate the CDMA radio module in your mobile computer,  you need to contact your 

wireless carrier and set up an account for each mobile computer�  The following table 

lists the carriers that ecom instruments currently supports�  If your carrier is not listed 

in the table, please contact ecom instruments product support to see if it is now sup-

ported�

Currently Supported  Carriers

Country

Carriers

United States

AT&T, Verizon

Turn the WWAN Module On and Off

Before you can start using your WWAN module, you need to enable it� You can use Wire-

less Center to enable and disable your WWAN connectivity, as well as Bluetooth and 

Wi-Fi communications�

 

1 Tap Start > Settings > Connections > Wireless Center�

 

2 Tap Phone to turn on the WWAN module

 

3 (Optional) To configure the WWAN module, tap Menu in the tile bar at the bottom 

 

   of the screen�

 

4 Tap OK when you are done configuring the options.

 

5 Tap OK to close Wireless Center�

About Switching Network Carriers

Your Flexible Network Radio-enabled i�roc

®

 Ci70 -Ex, or  mobile computer contains a 

highly configurable WWAN platform. When you switch network carriers, or perform a 

clean boot, you need to set your cellular carrier, and your network connection�

Note:

Your cellular carrier and network connection are set independently of each other� 

If you select a cellular carrier that is not supported on your current network connec-

tion,  you must manually switch your network connection�

About the Network Connection

Note: When you perform a clean boot, the selected carrier will default to generic UMTS�

When you perform a clean boot, all user-created network connection entries are de-

leted, and only the generic UMTS remains. After you perform a clean boot, you can find 

more information about generic UMTS by tapping Start > Settings > Connections > Con-

nections > Tasks tab > Manage Existing Connections > Modem tab�

Your UMTS connection entry can be automatically built from your carrier issued SIM 

card� To automatically recreate your network connection,  install your SIM card and 

tap Start > Settings > Connections > Connections > Tasks tab > Automatically configure 

connection�

Switch Network Carriers

Use the Carrier Selection application to quickly change your WWAN radio network car-

rier on your Flexible Network Radio-enabled i�roc

®

 Ci70 -Ex, mobile computer�

 

1 Tap Start > Settings > Personal > Carrier Selection�

 

2 From the Carrier drop-down menu, select the new carrier and tap OK� 

 

   A dialog box appears asking if you want to switch carriers�

 

3 Tap Yes to switch carriers�

Содержание i.roc Ci70-Ex








































Отзывы: