Ecom CP 400, Руководство по эксплуатации

Страница: 4 / 34

35
2. Calibrator Interface
Figure shows the location of the process measurement inputs, while table describes their use.
Figure 1: Pressure Measurement Inputs Side View
Table 1: Process Measurement Inputs
No. Name Description
, 2 Input Terminals These terminal are used to measure current, voltage and
a contact closure for switch test.
3 P Pressure Port This is the connection for the internal sensor P
4 P2 Pressure Port This is the connection for the internal sensor P2
5 RTD Probe Connector This connector is where the RTD probe is plugged in.
6 Serial Interface This is used to interface to optional external modules.