Ecom CP 400, Руководство по эксплуатации

Страница: 32 / 34

63
13. Warranty and liability
Under the general terms and conditions of business, ecom instruments GmbH offers a 2-year warranty
for function and materials on this product under the specified operating and maintenance conditions.
Not covered are all wearing parts (e.g. batteries, sensors, displays, lamps, etc.) as well as calibrations.
This warranty does not extend to products that have been used improperly, altered, neglected, dama-
ged by accident or subjected to abnormal operating conditions or improper handling.
In the event of a warranty claim, the faulty device should be sent in. We reserve the right to readjust,
repair or replace the unit.
The above warranty terms represent the sole rights of the purchaser to compensation and apply exclu-
sively and in place of all other contractual or statutory warranty obligations. ecom instruments GmbH
does not accept liability for specific, direct, indirect, incidental or consequential damages or losses,
including the loss of data, regardless of whether they are caused by breach of warranty, lawful or
unlawful actions, actions in good faith or other actions.
If in certain countries the restriction of statutory warranty and the exclusion or restriction of incidental
or consequential damages is unlawful, then it may be possible that the above restrictions and exclusi-
ons do not apply for all purchasers. If any clause in these warranty terms should be found to be invalid
or unenforceable by a competent court, then such a judgement shall not affect the validity or enforcea-
bility of any other clause contained in these warranty terms.
14. Maintenance
14.1 Replacing Batteries
Replace batteries as soon as the battery indicator turns on to avoid false measurements.
If the batteries discharge too deeply the CP 400/420 will automatically shut down to avoid
battery leakage.
Note: Use only AA size alkaline batteries or optional rechargeable battery pack.
14.2 Cleaning the Unit
Warning:
To avoid personal injury or damage to the calibrator, use only the specified replacement
parts and do not allow water into the case.
Caution:
To avoid damaging the plastic lens and case, do not use solvents or abrasive cleansers.
Clean the calibrator with a soft cloth dampened with water or water and mild soap.