Ecom CP 400, Руководство по эксплуатации

Страница: 5 / 34

36
Figure 2 shows the location of the keys. Table 2 describes the function of each key.
Figure 2: Keypad
Table 2: Key Functions
No. Name Description
Function Keys These keys are used in various ways, primarily
to configure the calibrator
2 ON/OFF Key This key is used to turn the calibrator on and off
3 ZERO Key This key is used to zero pressure measurements
4 Backlight Key This key is used to turn the backlight on and off
2.1 Calibrator Display
The Calibrator Display consists of two regions: The menu bar (located along the bottom
of the screen) is used to access a menu system. The main display (the rest) consists of
up to three process measurement sub-regions.
These sub-regions will henceforth be referred to as the
UPPER, MIDDLE and LOWER displays. Figure 3 shows
the location of the different display fields while table 3
describes them.
Figure 3: Display