Ecom CN, Руководство по эксплуатации

Страница: 13 / 26

ecom-CN Page 13
Then a data printout can be started
(
„Print“ and <OK> ). The ecom-CN is pre-
set for a printout via the infrared printer
type
HP 82240B .
For the case the new IR printer type ecom-
P is in use, a corresponding selection must
be made under „Adjustments“ / „Inter-
nal“ .
Please care for a frictionless (direct sight) connection between the
sending diode on the front of the instrument and the receiving diode
on the printer. The maximal distance between both units should not
exceed ca. 40 cm otherwise a troublefree transfer is no more ascer-
tained in any case.
Press
<ESC> after printout termination to return to the "Main
menu" .
5. Adjustments
Additionally to the functions described
above, the
ecom-CN allows several ad-
justments. From the main menu select the
sub-menu
"Adjustment" and confirm with
<OK> . A selection of adjustable parame-
ters is displayed which can be adjusted
according to the application. Place the
cursor on the desired line and press
<OK>
to call up or modify the adjustment.
Unit
O2 reference
Air pressure
Set clock
Type of fuel
Internal
Print
Look at
Store to memory
Select with ↑↓ !
M