Ecom CN, Руководство по эксплуатации

Страница: 20 / 26

Page 20 ecom-CN
The desired function can be selected in the rider „Measurement da-
ta“. The following functions are available for the remote operation of
the
ecom-CN :
Gas analysis
Starts gas analysis procedure until the key „Stop“ is pressed
O2 check
Starts O2 check until the key „Stop“ is pressed
Draught
Starts draught measurement until the key „Stop“ is pressed
Draught=0
Zeroes draught sensor
Stop
Quits active measurement
Quit
Closes the programme without data export in the file ECOM.TXT
Accept
Closes the programme with data export in the file ECOM.TXT
During the measurement procedure, the cur-
rent values are displayed in a table on the
PDA.
If the button „Accept“ is pressed, the data get
written in the file ECOM.TXT and the pro-
gramme gets closed. The transfer between
PDA and instrument is secured by a check
sum. By transfer errors, the error message
„Transfer error“ is displayed.
8. Maintenance tips
To secure the accuracy of your measuring instrument we recom-
mend the annual check by an authorized ecom partner. In the case
of strong demand (e.g. permanent several hours of measurement
per day, rough conditions etc.) shorter intervals between checks
should be selected - please contact your ecom partner. All ecom
partners are listed under www.ecom.de. Do not use other sensors or
feelers than those we selected and keep in mind that service jobs
made by unauthorised centres will result in a complete warranty loss.