37. User
Instructions
37.1
Annual Servicing.
It is a condition of the boiler
warranty that all servicing and maintenance
be carried out annually by eco hometec
approved engineers only.
When the word [INSPECTION] is displayed
in the LCD display on the control panel, a
full service of the unit is required.
A service has to be carried out when :
The status display appears INSPECTION
or
Every 12 months
37.2
Decommissioning the boiler.
When decommissioning the boiler,
precautions should be taken to avoid frost
damage. Therefore it is essential that both
the boiler and the central heating system
are completely drained down.
37.3
Built-in clock
The appliance has a unique built-in 3
channel programmable time clock. This
enables not only the setting of the heating
times for various temperatures, but also the
heating times for hot water. During
programmed off periods Combi models (‘S’
types) will maintain a minimum storage
temperature of 40
o
C. For H and HS type
appliances connected to hot water cylinder
for this function to operate temperature
control has to be provided with a sensor
(available from eco hometec). When hot
water temperature control is provided by a
cylinder thermostat this function is not
available.
For convenience it is possible to ignore the
built in programmer and alternatively control
the boiler using a remote programmer.
Please check with your installer to confirm
which option has been installed.
Figure 36
Boiler Control panel
Page 56
eco hometec (uk) ltd.
