manualshive.com logo in svg

Eco Hometec EC 38kW, Инструкция по установке и эксплуатации

Поделиться
Скачать
Eco Hometec EC 38kW Скачать руководство пользователя страница 37

This programme enables the setting of 3 
time blocks (3 start and 3 end times) per 
day (24 hours) for higher and lower room 
temperatures.   
 
This menu has two submenus: 
 
a. the days of the week 
 
b. the start and end times of each block 
 
To access this function from the main menu 
display press “MENU” button for three 
seconds. 
 
You will arrive at “PARTY O HOURS” in the 
display. 
 
Press the “+” button three times to arrive at  
SET CH TIMER 
 
Press the "MENU" button once and the first 
display will be "Monday" use the "+" and "-" 
buttons to scroll through this submenu to 
reach the day you want to change.  
 
Having found the correct day, press the 
"MENU" button once to arrive at 

 

“CopySU>MO” ignore this and press the "+” 
button once to arrive at “SWITCH ON 1”  
“MO 00:00” 
 
Press the "MENU" button once and the 
hours “00” part of the display will start 
flashing. 
This sets the hour the heating will start for 
the first of three possible on times per day 
Adjust the hour by pressing the "+" and "-" 
buttons.  When the correct time is displayed 
confirm by pressing "MENU" button once 
and the minutes part of the display “00” will 
start flashing. 
 
Adjust the minutes by pressing the "+" and 
"-" buttons.  When the correct time is 
displayed confirm by pressing "MENU" 
button once.   Press the "+” button once to 
arrive at “SWITCH OFF 1” “MO 00:00” 
This sets the hour the heating will switch off 
for the first of three possible off times per 
day. 
 
Adjust the hour by pressing the "+" and "-" 
buttons. 
 

When the correct time is displayed confirm 
by pressing "MENU" button once and the 
minutes part of the display “00” will start 
flashing. 
 
Adjust the minutes by pressing the "+" and 
"-" buttons.  When the correct time is 
displayed confirm by pressing "MENU" 
button once. 
Press the "+” button once to arrive at 
“SWITCH ON 2”  “MO 00:00” 
Repeat as above to programme all 3 start 
and 3 end times 

If you wish to ignore any periods then 
simply  enter "0.00". 

Please note due to the nature of the pre-
programmed boiler software there may be a 
half-hour delay in the CH system start and 
off times.  
This period can be offset by adjusting the 
on and off times. 
e.g. if you leave the house at 10:00 then  
enter 9:30 and if you are returning at  12:.30 
enter 12.00. 
Always confirm the times with the "MENU" 
button. 
Programming all periods - note: you may 
ignore any blocks by entering 00:00 with the 
exception of “SWITCH ON 1” and “SWITCH 
OFF 1” for which you must enter a real time. 
 
After you have programmed all three on and 
off period’s press the "+" button to arrive at           
“<-BACK” Press the MENU button and you 
will arrive at TUESDAY. 
 
Press the MENU button again and you will 
arrive at COPY  “MO -> TU” 
 
You can now copy the previous days 
program onto the next day e.g. Mondays 
times to Tuesday by pressing MENU or 
alternatively program in new times by 
pressing “+” button and repeating the 
process described in the previous section. 
 
To copy the previous days program Press 
the "MENU" button, you arrive at:  
“MON -> TUESDAY” 
 
Press the "MENU" button once to copy and 
the display will change to “WEDNESDAY”. 
 
Press the "MENU" button, you arrive at: 
“TU -> WEDNESDAY” 
 

 

                      EC 16~38 Installation Manual page

 

37

 

Содержание EC 38kW





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды