ECM NH3CAN Скачать руководство пользователя страница 33 | Manualshive

Страница: 33 / 35

ECM NH3CAN Скачать руководство пользователя страница 33

33

Appendix F:

Warranty and Disclaimers

WARRANTY

The  products  described  in  this  manual,  with  the  exception  of  the  lambda  and  pressure  sensors,
are warranted to be free from defects in material and workmanship for a period of 365 days from
the date of shipment to the buyer.   Within the 365 day warranty period, we shall at our option
repair such items or reimburse the customer the original price of such items which are returned to
us with shipping charges prepaid and which are determined by us to be defective.  This warranty
does  not  apply  to  any  item  which  has  been  subjected  to  misuse,  negligence  or  accident;  or
misapplied; or modified; or improperly installed.

The  lambda  and  pressure  sensors  are  considered  an  expendable  part  and  as  such  cannot  be
covered by a warranty.

This warranty comprises the sole and entire warranty pertaining to the items provided hereunder.
Seller makes no other warranty, guarantee, or representation of any kind whatsoever.  All other
warranties, including but not limited to merchantability and fitness for purpose, whether express,
implied, or arising by operation of law, trade usage, or course of dealing are hereby disclaimed.

The warranty is void if the display head is opened.

LIMITATION OF REMEDY

Seller's  liability  arising  from  or  in  any  way  connected  with  the  items  sold  and/or  services
provided shall be limited exclusively to repair or replacement of the items sold or refund of the
purchase  price  paid  by  buyer,  at  seller's  sole  option.    In  no  event  shall  seller  be  liable  for  any
incidental, consequential or special damages of any kind or nature whatsoever, including but not
limited  to  lost  profits  arising  from  or  in  any  way  connected  with  items  sold  and/or  services
provided to buyer, whether alleged to arise from breach of contract, express or implied warranty,
or in tort, including without limitation, negligence, failure to warn or strict liability.  In no event
shall  the  company's  liability  to  buyer  arising  out  of  or  relating  to  the  sale  of  any  product  or
service exceed the purchase price paid by buyer to the company for such product or service.

PRODUCT CHANGES

We reserve the right to discontinue a particular product or to make technical design changes at
any time without notice.

«
...
31
32
33
34
35
»

Содержание NH3CAN




































Отзывы:

Нет отзывов