ENGLISH
Translation of the German original user manual
26
Now you can carry out the programming in steps of 10 (0-200) by
pressing
+
and
–
.
In order to leave the programming mode,
wait until “CLn” appears and
then press the
–
button.
For example, if you have programmed 90, then you will be prompted
with a “CLn” on the display to clean the brew group after 90 brewing
cycles. Clean the brew group (see 7.2
“
Brew group cleaning
”
).
If you operate the brewing lever after "CLn" appears on the display, a
counter on the display counts from 10 to 1 per brewing lever operation.
The temperature value is displayed and the programmed reminder
value is active again
We recommend a cleaning of the brew group after about 90 to 140 brewing cycles. As a
brew cycle only a brew over 15 seconds is counted.
6.3.5 Programming the ECO-Mode
The ECO-Mode gives you the option to set a timer that will automatically switch off your machine. After the
last brewing process, the machine will start the timer. The timer will be running in the background and is not
visible. When the timer ends the machine will automatically turn off. To reactivate the machine, either press
a PID key or switch the machine off and on again.
1.
Switch on the machine.
2.
Press
+
and
–
at the same time and “t1” appears on the display.
3.
Press the
–
button until you reach “Eco”. Press
+
to enter the Eco
menu.
4.
Now you can carry out the programming in steps of 30 min by pressing
+
and
–
. In order to leave the programming mode, wait a short time
and the menu will be left automatically.
5.
After a short period the setting will be adapted and saved.
6.3.6 Turn off PID display feature
There is the option to turn the PID display off: Press the
+
button until the display turns off. A dot will appear
on the display, which indicates that the machine is still turned on. The display will be turned on again by
pressing the
+
button once more.
6.4 Preparing coffee
Use the portafilter with the corresponding filter (1 cup) for the preparation of 1 cup and use the big filter (2
cups) to prepare two cups. Make sure that the filter is firmly locked into the portafilter.
Fill the ground coffee (with the right grind for espresso) into the filter.
Compress the ground coffee with a tamper. Clamp the portafilter firmly into the brew group.
Place the cup under the spout of the portafilter (for the preparation of 2 cups, put 1 cup under each spout).
Now activate the brew lever to start the brewing process.
