Eclipse EC-P8, Руководство по установке

Страница: 31 / 48

P0031-LI-02.01 31
Group 20: Zone Mimic
The mimic condition of each zone can be assigned to an output:
No Type & Description
2001 Zone 01 Mimic
This output type activates when zone 01 is active and
deactivates when zone 01 is healthy.
2002-
2018 Zone 02 - 18 Mimic
As Zone 01 Mimic.
Group 30: Zone Alarm
The alarm condition of each zone can be assigned to an output:
No Type & Description
3001 Zone 01 Alarm
This output type activates when zone 01 generates an alarm
and deactivates when the alarm is reset.
3002-
3018 Zone 02 - 18 Alarm
As Zone 01 Alarm.
Group 40: Zone Tamper
The tamper condition of each zone can be assigned to an output:
No Type & Description
4001 Zone 01 Tamper
This output type activates when zone 01 generates a tamper
alarm and deactivates when the alarm is reset.
4002-
4018 Zone 02 - 18 Tamper
As Zone 01 Tamper.
Group 50: Zone Masked
The mask condition of each zone can be assigned to an output:
No Type & Description
5001 Zone 01 Masked
This output type activates when zone 01 generates a mask
fault and deactivates when the fault is cleared and reset.
5002-
5018 Zone 02 - 18 Masked
As Zone 01 Masked.
Group 60: Zone Fault
The fault condition of each zone can be assigned to an output:
No Type & Description
6001 Zone 01 Fault
This output type activates when zone 01 generates a fault
and deactivates when the fault is cleared and reset.
6002-
6018 Zone 02 - 18 Fault
As Zone 01 Fault.
Group 70: Zone Bypassed
The bypass condition of each zone can be assigned to an output:
No Type & Description
7001 Zone 01 Bypassed
This output type activates when zone 01 is bypassed and
deactivates when the zone is reinstated.
7002-
7018 Zone 02 - 18 Bypassed
As Zone 01 Bypassed.
Group 80: User Access
The system access of each user can be assigned to an output:
No Type & Description
8000 User 00 Access
This output type activates for 30 seconds after user 00 has
entered their access code.
8001-
8010 User 01 - 10 Access
As User 00 Access.
Communication Port
This option allows the operating mode for the on-board
communication port to be configured.
Locations:
6201
- Com Port 1: Mode.
Entry Mode: Selection List (see page 15).
0 Alco UDL
This mode configures the selected communication port for
AlcoUDL direct link operation. The USB-Link should be connected
to the computer and the other end should be connected to the
selected control panel communication port.
1 Printer
This mode configures the selected communication port for printer
operation. Use this mode when using a terminal program via the
USB-Link to capture the printer output from the control panel.
2 3
rd
Party Module
This mode configures the selected communication port for a 3
rd
Party Module operation. Use this mode when connecting a
supported 3
rd
party communication module to the control panel.
3 Communication Module
This mode configures the selected communication port for
Communication Module operation. Use this mode when
connecting any Alcosec communication module to the control
panel.
4 Contact ID
This mode configures the selected communication port for
Contact ID operation. In this mode the Contact ID in ASCII format
is sent to the port.
5 Debug USB-Link
This mode configures the selected communication port for data
debug operation. Use this mode when using a terminal program
via the USB-Link to capture the debug data from the control
panel.
GSM & SMS Centre
These options allow the GSM and SMS Centre to be configured.
Locations:
6301
- GPRS APN Name
6302
- GPRS APN User
6303
- GPRS APN Password
6304
- SIM Pin
6302
- SIM Credit Code
6311
- SMS Service Centre
Entry Mode: String Edit - Number Mode (see page 17).
GPRS APN Name
The Access Point Name (APN) used by the GSM network operator
for IP packet data communication.
GPRS APN User
The APN user name used to log into the APN.