7
Installation Guide
7
tel - 1-866-766-2267
email - [email protected]
Illustrations are typical and may not match exact vehicle detail
FCTP-GM2403
Trailering Camera System
Once the door panel is removed, place in a safe area to
avoid damage.
NOTE
Step 7:
With the door panel still leaned toward you and away from
the door, disconnect the door harness. Do this by releasing
the red locking tab and rotating the large Gray slide lock tab
towards the ground.
Step 6:
With the door panel leaned toward you and away from
the door, remove the door latch release cable. Do this by
pressing down on the tab, pulling back and then rotating the
fastener 90 degrees towards the door until the cable is able
to lift out of the retainer.
Red Locking
Red Locking
Tab
Tab
Gray Slide
Gray Slide
Lock
Lock
Step 1:
Locate and remove the T15 screw from the bottom of the
mirror cap.
Routing the Camera Cables
