15
Installation Guide
15
tel - 1-866-766-2267
email - [email protected]
Illustrations are typical and may not match exact vehicle detail
FCTP-GM2403
Trailering Camera System
Step 23:
Connect the GMS4-M2F-72 (
RIGHT
) or the
GMS4-M2F-128 (
LEFT
) to the camera cable and push them
together until fully seated. You will hear an audible click
when the connectors lock together. Secure the connector
to the factory mirror connector using a zip tie.
Step 24 (Driver Side Only):
Route the cable following the factory wiring and keeping
the cable away from any moving parts to the passenger
side kick area.
Perform Steps 1-23 for the driver’s side door.
Installing the Camera Caps
Step 3:
Starting with the outermost rounded edge, pop
the camera pods into place and secure with the
factory T15 screw. Repeat this for the driver’s side.
At this time remove the protective film from the
camera lens. Failure to do this will result in a
slight blur to the camera’s picture.
NOTE
