30
Installation Guide
30
tel - 1-866-766-2267
email - [email protected]
Illustrations are typical and may not match exact vehicle detail
FCTP-GM2403
Trailering Camera System
Additional Testing
Activate the right turn signal. Verify the right camera is displaying on the radio’s screen.
Activate the left turn signal. Verify the left camera is displaying on the radio’s screen.
Place your foot on the brake and place the vehicle in reverse. The rear camera will display on the screen.
Place the vehicle back in park to go to back to the main display.
Once proper operation has been confirmed, ensure all factory components are in working order (radio’s touch
screen, radio controls, etc.), it is now time to secure any loose components and/or cables and reassemble the
vehicle.
When using the Graphical User Interface and selecting camera views, you may run into a
situation where selecting a camera view triggers the icon in the upper left corner of the main radio screen. If
this occurs, it can be fixed by pressing and holding the icon in the upper left corner and dragging it off to the
center so that no icon will be present in the upper left corner.
Step 3:
Enabling one of the two Front camera options from the Camera Setup menu will enable the front camera in
the camera menu.
1. Enable Front Camera Speedup Trigger
- When enabled, the front camera will display when exiting
reverse and turn off after 8 MPH.
2. Enable Front Camera Slow Down Trigger
- When enabled, the front camera will display when speed
is reduced below 10MPH and the steering wheel is turned more than 15 degrees. This prevents unwanted
front camera activation in stop and go traffic. (Note: Vehicle speed must first exceed 15 MPH to activate this
feature)
Enabling the Front Camera (continued)
NOTE
