12
Installation Guide
12
tel - 1-866-766-2267
email - [email protected]
Illustrations are typical and may not match exact vehicle detail
FCTP-GM2403
Trailering Camera System
Step 16:
Locate the 2 gray retention clips, circled in
yellow, holding the mirror harness to the
inside of the door. Squeeze the sides and
push them in to release the harness. Pull
the harness through the opening, circled
in red, to easily route and secure the
camera extension harness to the factory
wiring.
Step 15:
Remove the under dash beauty panel,
if present, by removing the push pin
fasteners.
(2 under the glove compartment and 1
towards the front of the vehicle)
Routing the Camera Cables (continued)
