10
There are two methods of setting the set-point.
1. Closed Loop
You can use the light sensor to function as a closed loop sensor. When set as a closed
loop sensor, the controller will dim the lights until the light level recorded at the sensor
meets the set point value. For more information on this operating mode, see the section
at the beginning of this guide titled Daylight Harvesting Application. A light sensor must
be linked to the controller before proceeding.
NOTE: This process is best performed when there is no natural light; either close the
blinds or complete this step at night.
1. With the light on, adjust the light level from the fixture using the switch until it
matches the desired light level.
2. Tap the light sensors teach button 3 times to set the daylight harvesting
parameters to a closed loop function. Move away from the sensor so your
shadow does not affect the sensor reading. The light will blink once to
acknowledge the change.
2. Open Loop
The lighting set-point can be set to an absolute value useful in open-loop sensor
applications. The absolute value selected becomes the maximum dimming set-point.
1. With the light on, tap the light sensors teach button 4 times to set the set point
to 20%.
2. Tap the button additional times incrementing the set point value by 20%. Five
(5) taps would equal 40%, seven (7) taps would be 80%.
3. The light will blink once at three taps and then begin blinking according to the
level set to confirm the change after 3 seconds.
Taps
Max. Dim SP
Min. Dim SP
Blinks
4 taps
20%
100%
2 blinks
5 taps
40%
100%
3 blinks
6 taps
60%
100%
4 blinks
7 taps
80%
100%
5 blinks
Using Smart Click to Configure the Controller
Configuring the controller requires that at least one wireless wall switch is linked to the
controller.
The Smart Click menu includes these parameters:
Level 1 Learn Mode
Level 2 Clear Switch/Clear All
Level 3 Repeater Function
Level 4 Status Telegram Function
Level 5 Time out Periods
Level 6 Auto-ON with Motion Function
Level 7 Minimum Dimming Output Enable
Level 8 Lighting Set-point
Level 9 Maximum Dimming Output
Level 10 Minimum Dimming Output
