manualshive.com logo in svg

Echo X7522340000, Руководство по безопасности, Страница: 9 / 56

Поделиться
Скачать
Echo X7522340000 Скачать руководство пользователя страница 9

ENGLISH

Hearing/Ear Protection 

ECHO Inc. highly recommends wearing ANSI 

recognized hearing protection whenever you are 

operating the unit.  Hearing protection prevents 

hearing loss caused by frequent or prolonged 

exposure to engine noise. ECHO Inc. recommends 

ear plugs, or for constant heavy-duty use, wear 

earmuff-style hearing protection.

Combination Face/Hearing Protection 

For complete face/hearing protection, the use of 

combination ear muffs/face shield provides face and 

hearing protection all in one unit. 

ALWAYS 

wear safety glasses or goggles under the face shield, and wear head 

protection when cutting overhead using a PAS or SB unit with Power Pruner or 
Hedge Clipper Attachments. 

PROTECTIVE CLOTHING 

Gloves

 

 

WARNING

Sharp Blades/Powerful Cutting Action.  Contact with sharp edges of moving 

blades and attachments will cause severe injury or amputation.  Keep hands, 

fingers, and all other body parts away.  Work gloves and other heavy work 

clothing do not protect against serious injury if contact is made with moving 

blades or attachments.
Wear sturdy work gloves to provide protection against cuts and scratches, and 

to help reduce the effects of vibration. 

9

OPERATOR SAFETY

Содержание X7522340000

























































Отзывы:

Нет отзывов