manualshive.com logo in svg

Echo X7522340000, Руководство по безопасности, Страница: 37 / 56

Поделиться
Скачать
Echo X7522340000 Скачать руководство пользователя страница 37

ENGLISH

Plastic Tri-Cut Blade

SRM Pro Maxi-Cut

GT Maxi-Cut

Blade Sharpening

All blades must be kept sharp for best cutting performance.  8 Tooth Grass/

Weed blades can be sharpened using the instructions in the Operator’s 

Manual.  Brush and Clearing blades require professional sharpening.  

Improper sharpening can cause blade failure and result in severe injury.  

Plastic/Metal Tri-Cut Blades

Use blade set-up guide for configuring 

trimmer-brushcutter to use plastic or 

metal tri-cut blades.

•  Use Plastic tri-cut blades to cut grass 

and weeds

•  Use Metal Tri-cut blades to cut 

reeds, large weeds, and light brush

•  Read, understand, and obey all 

trimmer-brushcutter safety rules 

before using tri-cut blades.

•  NEVER

 use tri-cut blades to cut 

heavy brush, saplings, or small trees.  

PE Models

 

 DANGER

Striking concrete or other hard materials with spinning edger blade can cause 

severe blade damage or breakage, and serious or fatal injuries from flying 

fragments.  Stop unit immediately and check blade if an object is struck.  

Replace blade if broken, cracked, bent, chipped or otherwise damaged, or if 

unit began shaking or vibrating after striking the object.
Small stones and other hard debris can be thrown from blade guard, and strike 

bystanders and nearby buildings.  Keep bystanders a minimum of 50 feet (15 

m) away when operating edger.  Always keep flow of edging debris directed 

away from windows, parked vehicles, buildings, and bystanders.   Always 

operate edger with unit to right side of body only.  Wear eye protection, work 

gloves, and protective clothing.  Use full face shield when edging in rocky or 

debris-filled soil.         

SHARPENING  

8-TOOTH  

WEED/GRASS 

BLADE

30° ANGLE

LEAVE 2MM  

RADIUS 

UNFILED

SHARP CORNER 

GULLET MAY 

CRACK

37

OPERATION

Содержание X7522340000

























































Отзывы:

Нет отзывов