manualshive.com logo in svg

Echo X7522340000, Руководство по безопасности, Страница: 20 / 56

Поделиться
Скачать
Echo X7522340000 Скачать руководство пользователя страница 20

ENGLISH

 

 

DANGER

Explosion/Fire/Burn Hazard. 

 Gasoline is extremely flammable.  Vapors are 

explosive.  Keep at least 50 feet (15 m) away from heat, sparks, open flame, 

smoking materials, static electricity, and all other 

sources of ignition when fueling unit.  

Gasoline vapor is heavier than air, and can 

travel along the ground to nearby sources of 

ignition such as electrical motors, pilot lights, 

and hot or running engines.  Vapors ignited by 

an ignition source can flash back to the fuel 

container, resulting in an explosion, fire, serious 

or fatal injuries, and extensive property damage.

Follow these important safety precautions to 

minimize risk of explosion or fire:

•  ALWAYS

 use an approved, "no-spill" type fuel container with tight-fitting 

caps.

•  ALWAYS

 follow posted safety instructions for 

filling fuel containers at filling stations.

•  ALWAYS

 place container to be filled with 

gasoline on the ground to prevent static build-

up during filling.

•  ALWAYS

 keep the metal filling pump nozzle in 

contact with the fuel container while dispensing 

fuel to prevent buildup and discharge of static 

electricity.

•  NEVER

 fill fuel container on SUV/truck bed or 

in trunk of car.

•  NEVER

 smoke near fuel.

•  NEVER

 allow flames or sparks near fuel.

•  ALWAYS

 loosen fuel caps slowly to allow 

pressure in tanks and containers to escape

•  ALWAYS

 use extreme care when mixing, 

storing, or handling fuel. 

•  NEVER

 remove tank cap or refuel a unit while the engine is hot or running

Fill Fuel Outdoors

Open Fuel Cap Slowly

20

FUELING

Содержание X7522340000

























































Отзывы:

Нет отзывов