Echo X7522340000 Скачать руководство пользователя страница 13

Страница: 13 / 56

ENGLISH

NEVER

install any other type of blade, line head, cutting attachment, part, or

accessory on your trimmer/brushcutter unless it is approved for use on your

specific model. Parts and accessories that appear to fit properly may create

a safety hazard when the unit is operated, and could result in serious injury to

operator and bystanders.

ALWAYS

use the correct tools for assembly. Using

incorrect or improperly sized tools can result in a

sudden slip and serious injuries.

ALWAYS

follow the assembly instructions in order,

as shown in the Operator’s Manual. Improper

assembly can result in sudden part failure, and

serious injuries.

NEVER

use parts that appear to be worn,

damaged, improperly sized, or otherwise

incompatible with mating parts. Contact your

dealer or Consumer Support for assistance if parts

do not fit properly.

NEVER

modify parts or use parts from other

pieces of equipment to assemble your unit. Use

only parts that are designed to fit your model.

Modifying a part to fit may weaken it, and cause

premature failure. Parts from other models may

not work properly, and can create unsafe operating

conditions.

Wiring

Position wiring safely to prevent snagging,

separation of connectors, or breakage during

operation. Gather excess wire, and secure with

wiring clamp if provided on unit, or tuck behind the

air filter area. Do not place wiring directly against

hot engine components.
Check wiring and connectors for nicks, cuts, exposed wire, or other damage,

and repair or replace as needed. Exposed wire or connectors can cause

shocks, sparks, and risk of fire or explosion, resulting in serious injury.

Check wire terminals for secure connections. Loose connections can cause

erratic engine operation, or prevent Stop switch from stopping engine.

Grass Trimmer/Brush Cutter

MODELS,

Operator’s Manual

SRM- 311
SRM- 311S
SRM- 311U

WARNING DANGER

X7522270602

X7522270602
11/15

WARNING

X7522270602 X7522270602
X752227dtpoy jdf irj attohh
aT hhs oij aoig jaoiert
SRM- 311- Kper tijpoijreta;lrek;etyt

Keep feet and

hands away

ASSEMBLY

Содержание X7522340000

























































Результаты поиска

Содержание X7522340000

Отзывы:

Echo X7522340000, Руководство по безопасности, Страница: 13 / 56

Результаты поиска

Содержание X7522340000

Отзывы: