manualshive.com logo in svg

Echo X7522340000, Руководство по безопасности, Страница: 25 / 56

Поделиться
Скачать
Echo X7522340000 Скачать руководство пользователя страница 25

ENGLISH

•  NEVER

 start a unit near a gasoline 

container or spilled gasoline. 

•  ALWAYS

 move at least 3 m (10 ft.) 

away from refueling location before 

starting engine. 

•  If a protective blade cover is used, 

ALWAYS

 remove blade cover before 

starting unit.  Keep blade cover nearby, 

and place cover back on blade when 

unit is off and blade has stopped. 

Do not operate indoors

Do not start within 3 m (10 ft.) 

of fueling location

3 m 

(10 ft.)

•  NEVER

 start a PAS/HCA (extended 

shaft, articulating blade) unit while 

blade is in folded/locked position.  Make 

cutting angle adjustment first.

•  ALWAYS

 start the unit with power head 

on the ground, with cutting head/work 

attachment off the ground and clear of 

debris and all obstructions.   

•  NEVER

 “drop start” the unit or attempt to 

start the unit while it is resting on blade 

tips.   

•  ALWAYS

 grip the unit firmly when 

starting to prevent loss of control when 

pulling starter handle. 

•  ALWAYS

 hold the unit securely on the 

right side of your body with both hands. 

Use left hand on the front handle and 

right hand on the rear handle, or use left 

and right  handgrips on units equipped 

with U-Handle  for metal blade use. 

•  MAINTAIN

 a secure, two-handed grip at 

all times while unit is in use. 

•  ALWAYS 

shut unit off immediately if it 

shakes or vibrates excessively when 

started.  Tag unit, and have it checked 

by an authorized service center before 

placing back in use.

Never drop start unit

Never use one-handed

25

STARTING

Содержание X7522340000

























































Отзывы:

Нет отзывов