manualshive.com logo in svg

Echo X7522340000, Руководство по безопасности, Страница: 5 / 56

Поделиться
Скачать
Echo X7522340000 Скачать руководство пользователя страница 5

ENGLISH

Slip Hazard Alert

Wear slip-resistant footwear to reduce risk of falls.

Operate Only With Debris Shield In Place

Do not operate without correct debris shield.   

Stop Symbol

Indicates the “Stop” position for the engine ignition switch 

(Stop Switch).

Keep Bystanders 15 m (50 feet) Feet Away

Keep bystanders at least  15 m (50 feet) away when 

operating unit.

Do Not Operate Near Electrical Lines

Do not operate closer than 15 m (50 ft.) to electrical lines.

Flame Prohibition

Do not allow flames or sparks near fuel or fuel vapors.

No Smoking Prohibition

Do not smoke near fuel.

Do Not Operate Equipment While Impaired

Do not operate equipment while under the influence 

of alcohol, medication, or any other substance that 

can impair judgment, reflexes, vision, or coordination. 

Operating a unit while impaired can result  in serious 

injury to operator and bystanders, or cause damage to 

property or equipment.

15M

STOP

15M-50ft

5

SAFETY SYMBOLS AND WARNINGS

Содержание X7522340000

























































Отзывы:

Нет отзывов