3
CSG-670 TYPE1-E
SYMBOLS AND SIGNS
DANGER
The safety alert symbol accompanied by the
word “DANGER” calls attention to an act or
condition which WILL lead to serious
personal injury or death if not avoided.
CIRCLE AND SLASH
SYMBOL
This symbol means the specific
action shown is prohibited. Ignoring
these prohibitions can result in
serious or fatal injury.
CAUTION
The safety alert symbol accompanied by the
word “CAUTION” calls attention to an act or
condition which may lead to minor or
moderate personal injury if not avoided.
NOTE
This enclosed message provides tips for use,
care and maintenance of the unit.
DECALS
Locate this safety decal on your unit. The complete
unit illustration found in the “DESCRIPTION”
section will help you locate them.
Make sure the decal is legible and that you
understand and follow the instructions on it. If a
decal cannot be read, a new one can be ordered
from your ECHO dealer.
DANGER
Always cut at wide open throttle
and with the wheel fully up to
speed. Failure to do so may cause
premature belt or wheel wear.
1. Read and understand your operator’s manual before
using this product.
2. Use only ECHO approved cutting accessories.
3. Always wear proper safety equipment as outlined in
your operator’s manual.
4. Do not twist or overload the wheel while cutting.
5. For a copy of the operator’s manual, contact your
ECHO dealer or ECHO, INC., 400 Oakwood Rd.,
Lake Zurich, IL 60047-1564.
Part Number 890188-07060
Part Number 890178-07060
Part Number 890160-07060
D A N G E R — R e a d a n d f o l l o w
a l l s a fe t y p r e c a u t i o n s i n o p e r a t o r ’s
manual. Failure to do so could result
in serious personal injury.
Part Number X503-006280
CSG–670
WARNING
The safety alert symbol accompanied by the
word “WARNING” calls attention to an act or
condition which CAN lead to serious
personal injury or death if not avoided.
IMPORTANT
The enclosed message provides information
necessary for the protection of the unit.
