Echo SRM series Скачать руководство пользователя страница 13

Страница: 13 / 52

ENGLISH

NEVER

use parts that appear to be worn, damaged,

improperly sized, or otherwise incompatible with mating

parts. Contact your dealer or Consumer Support for

assistance if parts do not fit properly.

NEVER

modify parts or use parts from other pieces of

equipment to assemble your unit. Use only parts that

are designed to fit your model. Modifying a part to fit

may weaken it, and cause premature failure. Parts from

other models may not work properly, and can create

unsafe operating conditions.

Wiring

Position wiring safely to prevent snagging, separation of

connectors, or breakage during operation. Gather excess

wire, and secure with wiring clamp if provided on unit, or

tuck behind the air filter area. Do not place wiring directly

against hot engine components.
Check wiring and connectors for nicks, cuts, exposed

wire, or other damage, and repair or replace as needed. Exposed wire or

connectors can cause shocks, sparks, and risk of fire or explosion, resulting in

serious injury.
Check wire terminals for secure connections. Loose connections can cause

erratic engine operation, or prevent Stop switch from stopping engine.

DEBRIS SHIELD

WARNING

Plastic Debris Shields are equipped with a sharp cut-off knife for

cutting nylon trimmer line to length during operation. Use extreme

care when assembling nylon line head to gear case to avoid acciden-

tal contact with cut-off knife. Wear work gloves when assembling

nylon line head to gear case, and avoid contact with sharp cut-off

knife edges.

Unit Configuration

GT Models:

If your Model GT curved

shaft trimmer is not fully assembled, you

must assemble the unit as instructed in the

Operator’s Manual provided with the unit.

Before using the unit, make sure the plastic

debris shield, trimmer head, and handle are

properly attached, and are securely fastened.

If your GT curved shaft trimmer has been pre-

assembled, you must make sure the plastic debris

shield, handle, and trimmer head are properly

installed and securely attached, as shown in the

Operator’s Manual provided with the unit.

Grass Trimmer/Brush Cutter

MODELS,

Operator’s Manual

SRM- 311
SRM- 311S
SRM- 311U

WARNING DANGER

X7522270602

X7522270602
11/15

WARNING

X7522270602 X7522270602
X752227dtpoy jdf irj attohh
aT hhs oij aoig jaoiert
SRM- 311- Kper tijpoijreta;lrek;etyt

Cut-Off Knife

SRM Debris Shield

GT Debris Shield

Cut-Off

Knife

ASSEMBLY

Содержание SRM series





















































Результаты поиска

Содержание SRM series

Отзывы:

Похожие инструкции для SRM series

Бренды по названию

Популярные бренды

Echo SRM series, Руководство по безопасности

Результаты поиска

Содержание SRM series

Отзывы:

Похожие инструкции для SRM series

Бренды по названию

Популярные бренды