Echo SRM series Скачать руководство пользователя страница 41

Страница: 41 / 52

ENGLISH

• NEVER

operate

a Power Pruner

Attachment while on

a ladder, in a tree, or

on slippery or unstable

surfaces.

• ALWAYS

make sure

that the pruned tree

branch or limb can fall

safely to the ground

after cutting.

• NEVER

stand under

a tree limb or branch

during cutting

• ALWAYS

keep guide

bar cover on guide bar

until unit is ready to be used.

• ALWAYS

keep chain properly tensioned

• NEVER

make guide bar/saw chain adjustments while unit is running. Stop

engine and disconnect spark plug lead before tensioning chain.

• ALWAYS

keep saw chain sharp. Dull chain will cause increased vibration

and premature guide bar and chain failure.

• ALWAYS

use only to cut wood.

Cutting any other type of material can

cause increased risk of kickback and damage to saw chain and guide bar.

• ALWAYS

stop engine immediately and check chain and guide bar for

damage if the cutting attachment strikes an obstacle during cutting.

• NEVER

use a saw chain with missing or damaged teeth. Excessive

vibration and erratic operation can cause chain failure and serious injury.

PAS PROPADDLE/PROSWEEP ATTACHMENT

Misuse, improper assembly, or use of unapproved

attachments, can result in serious injury, engine

failure, and voiding of warranty. Use only attachments

approved for use on Pro Attachment Series models.

Contact with moving work attachments can cause

entanglement and serious injury. Keep clear of moving

work attachment.

• ALWAYS

keep hands and feet away from moving

work attachment.

• ALWAYS

allow attachment to come to a complete

stop before handling.

• ALWAYS

keep attachment far enough away from

your body to prevent entanglement with rotating

parts.

Keep chain properly tensioned

CORRECT COLD

TENSION

CHAIN NEEDS

TENSIONING

CORRECT WARM

TENSION

SIDE LINK

CONTACTING

GUIDE BAR

1/8” (3mm)

BETWEEN SIDE

LINK AND GUIDE

BAR AT BOTTOM

DRIVE LINK

TANGS HANGING

OUT OF GUIDE

BAR

OPERATION

Содержание SRM series





















































Результаты поиска

Содержание SRM series

Отзывы:

Похожие инструкции для SRM series

Бренды по названию

Популярные бренды

Echo SRM series, Руководство по безопасности

Результаты поиска

Содержание SRM series

Отзывы:

Похожие инструкции для SRM series

Бренды по названию

Популярные бренды