Echo SRM series Скачать руководство пользователя страница 44

Страница: 44 / 52

ENGLISH

WARNING

Operating a poorly maintained unit can result in serious injuries to

operator and others. Maintain unit as instructed in Operator’s Man-

ual. Keep blades sharp and properly adjusted, and replace broken

parts immediately.

Moving parts can amputate fingers or cause severe injuries. Keep

hands, clothing and loose objects away from all openings. Always

stop engine, disconnect spark plug, and make sure all moving parts

have come to a complete stop before removing obstructions, clear-

ing debris, or servicing unit.

Your unit requires regular maintenance for safe operation and reli-

able performance. Using a poorly-maintained unit can result in an

injury caused by a part failure or other malfunction. Follow these

important safety instructions to reduce the risk of injury caused by

poor maintenance.

• NEVER

test for ignition spark by grounding spark plug near cylinder plug

hole. A spark could ignite fuel vapor, causing serious injury from explosion

or fire.

• NEVER

use a unit with broken, damaged, missing, or worn parts. Contact

your dealer for repairs if problems are found.

• NEVER

use substitute parts, parts from other models or brands, or used

parts, when performing maintenance or repairs. Use only new parts that are

manufactured for your specific serial number and model trimmer.

• NEVER

make temporary repairs on a unit - taking shortcuts or using

questionable parts and performing repairs that are not approved may create

a safety hazard that can cause serious injury. Improper repair may also

cause premature part failures, and void your product warranty.

• ALWAYS

keep blades sharp. Cutting with dull blades increases the

chances of jams and binding, reduces cutting efficiency, and increases

operator fatigue.

• ALWAYS

keep hedge clipper blades properly adjusted. Improperly adjusted

blades may result in poor cutting performance, increased risk of jams, and

premature blade wear or failure.

• ALWAYS

keep blades and gear case properly lubricated. Poor lubrication

can cause result in part failures and cause overheating.

• ALWAYS

keep fasteners tightened securely, and use the correct tools for

the job. Operation with loose fasteners can result in hazardous operation.

• ALWAYS

do a safety check after performing any service or maintenance on

the unit. Make sure all parts have been properly installed, all hardware is

properly tightened, and all guards and shields are in place.

• NEVER

reach into any opening while the engine is running. Moving parts

may not be visible through openings.

• ALWAYS

stop unit immediately and correct any problem if unit does not run

properly after performing service or maintenance. Operating a unit that has

been improperly repaired may result in serious injury.

• ALWAYS

have major service performed by a qualified service technician.

See your dealer for authorized service support.

MAINTENANCE

Содержание SRM series





















































Результаты поиска

Содержание SRM series

Отзывы:

Похожие инструкции для SRM series

Бренды по названию

Популярные бренды

Echo SRM series, Руководство по безопасности

Результаты поиска

Содержание SRM series

Отзывы:

Похожие инструкции для SRM series

Бренды по названию

Популярные бренды