Echo SRM series Скачать руководство пользователя страница 22

Страница: 22 / 52

ENGLISH

DANGER

The Operator’s Manual for your unit has specific

starting instructions for your model and type

of engine. For your safety and ease of starting,

always follow these starting instructions, and

obey the safety rules provided.

The cutting head/work attachment on units that

require starting at wide-open (full) throttle (throt-

tle trigger fully depressed) will start moving

immediately when the engine starts.

To avoid loss of control and serious injury:

• Stabilize unit on ground before pulling

starter handle.

• Stay clear of the cutting head/work

attachment.

• Keep the cutting head/work attachment off

the ground and clear of objects that could

be struck or become entangled.

• Release the throttle trigger immediately

when engine starts.

Before starting the unit, make sure you know the location of the unit’s “STOP”

switch, and know how to perform an emergency stop in case of a switch

malfunction. (See “Stopping” page 24)
The cutting head/work attachment (nylon line head, blade, or PAS/SB

attachment) must not move at idle, otherwise serious personal injury may

result. Periodic carburetor adjustment may be necessary to assure the

cutting head/PAS attachment does not move at idle. If the cutting head/

work attachment moves

at idle

, re-adjust carburetor according to “Carburetor

Adjustment” instructions and idle speed specifications provided in your

Operator’s Manual. See your dealer or contact Consumer Support for help if

you have any questions.
Follow these important safety rules when starting your unit:

• DO NOT

use unit if cutting head/work attachment moves while engine is

idling (throttle trigger not depressed). Adjust idle speed as instructed in your

unit’s Operator’s Manual before using unit.

• NEVER

start or run your unit indoors or

anywhere else where there is poor air

circulation. Indoor operation produces

dangerous levels of Carbon Monoxide,

a colorless and odorless poisonous gas.

Carbon Monoxide (CO) causes nausea

and other flu-like symptoms if breathed.

Prolonged exposure to CO may cause loss

of consciousness, brain damage, or death.

Grass Trimmer/Brush Cutter

MODELS,

Operator’s Manual

SRM- 311
SRM- 311S
SRM- 311U

WARNING DANGER

X7522270602

X7522270602
11/15

WARNING

X7522270602 X7522270602
X752227dtpoy jdf irj attohh
aT hhs oij aoig jaoiert
SRM- 311- Kper tijpoijreta;lrek;etyt

Stabilize unit on ground

Do not operate indoors

STARTING

Содержание SRM series





















































Результаты поиска

Содержание SRM series

Отзывы:

Похожие инструкции для SRM series

Бренды по названию

Популярные бренды

Echo SRM series, Руководство по безопасности

Результаты поиска

Содержание SRM series

Отзывы:

Похожие инструкции для SRM series

Бренды по названию

Популярные бренды