manualshive.com logo in svg

Echo SRM-266T, Руководство оператора, Страница: 19 / 40

Поделиться
Скачать
Echo SRM-266T Скачать руководство пользователя страница 19

SRM-266T

OPERATION

© 10/2014 ECHO Inc.

X7502027204

19

Storage

 - Fuel storage laws vary by locality. Contact your local government for the laws affecting your area. 

As a precaution, store fuel in an approved, airtight container. Store in a well-ventilated, unoccupied building, 
away from sparks and flames.

Stored fuel ages. Do not mix more fuel than you expect to use in thirty (30) days, ninety (90) days when a 
fuel stabilizer is added.

Stored two-stroke fuel may separate. ALWAYS shake fuel container thoroughly before each use.

Starting Cold Engine

The attachment will operate immediately when the engine starts, and could result in possible 
serious injury.

 

 Keep movable parts of the attachment away from objects that could become 

entangled or thrown, and surfaces that could cause loss of control.

1.

Stop Switch

Move stop switch (A) away from the STOP position.

2.

Choke

Move choke lever (B) to Cold Start Position (

).

3.

Purge Bulb

Pump purge bulb (C) until fuel is visible and flows freely in the 
clear fuel tank return line. Pump bulb an additional 4 or 5 
times.

A

B

C

D

Содержание SRM-266T









































Отзывы:

Нет отзывов