Echo SRM-266T Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 40

Echo SRM-266T Скачать руководство пользователя страница 13

SRM-266T

CONTENTS

© 10/2014 ECHO Inc.

X7502027204

13

CONTENTS

The ECHO product you purchased has been factory pre-assembled for your convenience. Due to packaging
restrictions, shield installation and other assembly may be necessary.

After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or
missing parts. Use the contents list to check for missing parts.

*Some Echo units may be factory pre-assembled. The nylon line head, plastic debris shield, and mounting
hardware shown in the contents list are pre-assembled to the unit. Assembly tools are not supplied with
these units. The front handle may need to be re-positioned for comfortable operation.

____ 1 - Power Head / Drive Shaft Assembly

____ - 1, Operator’s Manual

____ - 1, Safety Manual

____ - 1, Emission Control Warranty Statement

____ - 1, Warranty Registration Card

____ - 1, Safety Glasses

*____ - 1, Nylon Trimmer Head

*____ - 1, Plastic Shield

*____ - 1, Shield Plate

*____ - 3, 5mm x 16mm Screws (shield mount)

«
...
11
12
13
14
15
...
»

Содержание SRM-266T









































Отзывы:

Нет отзывов