Echo SRM-225 Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 52

Echo SRM-225 Скачать руководство пользователя страница 28

MAINTENANCE

SRM-225

28

X7722279402

© 2/2016 ECHO Inc.

Stopping Engine

1.

Throttle

Release throttle trigger and
allow engine to return to idle
before shutting off engine.

2.

Stop Switch

Move stop switch button (A)
backward to STOP position.

If engine does not stop when stop switch is moved to STOP
position, close choke - COLD START position - to stall engine. Have
your ECHO dealer repair stop switch before using unit again.

MAINTENANCE

Moving parts can amputate fingers or cause severe injuries. Keep
hands, clothing and loose objects away from all openings. Always
stop engine, disconnect spark plug, and make sure all moving
parts have come to a complete stop before removing obstructions,
clearing debris, or servicing unit. Allow unit to cool before
performing service. Wear gloves to protect hands from sharp
edges and hot surfaces.

Your ECHO unit is designed to provide many hours of trouble free service.
Regular scheduled maintenance will help your unit achieve that goal. If you are
unsure or are not equipped with the necessary tools, you may want to take your
unit to an ECHO Service Dealer for maintenance. To help you decide whether
you want to DO-IT-YOURSELF or have the ECHO Dealer do it, each
maintenance task has been graded. If the task is not listed, see your ECHO
Dealer for repairs.

Skill Levels

Level 1

= Easy to do. Common tools may be required.

Level 2

= Moderate difficulty. Some specialized tools may be required.

ECHO offers

REPOWER

TM

Maintenance Kits and Parts to make your

maintenance job easier.

A

«
...
26
27
28
29
30
...
»

Содержание SRM-225





















































Отзывы:

Нет отзывов