Echo SRM-225 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 52

Echo SRM-225 Скачать руководство пользователя страница 13

X7722279402

13

© 2/2016 ECHO Inc.

SRM-225

EMISSION CONTROL

EMISSION CONTROL (EXHAUST &
EVAPORATIVE)

CARB And EPA Emissions Control Information

The emission control system for the
engine is EM (engine modification)
and, if the second to last character of
the Engine Family on the Emission
Control Information label (sample
below) is “B”, “C”, “K”, or “T”, the
emission control system is EM and
TWC (3-way catalyst). The fuel tank/
fuel line emission control system is
EVAP (evaporative emissions). Evaporative emissions for California models are
only applicable to fuel tanks.

An Emission Control Label

is located

on the engine. (This is an EXAMPLE
ONLY, information on label varies by
engine FAMILY).

Product Emission Durability
(Emission Compliance Period)

The 50 or 300 hour emission
compliance period is the time span selected by the manufacturer certifying the
engine emissions output meets applicable emissions regulations, provided that
approved maintenance procedures are followed as listed in the Maintenance
Section of this manual.

«
...
11
12
13
14
15
...
»

Содержание SRM-225





















































Отзывы:

Нет отзывов