Echo SRM-225 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 52

Echo SRM-225 Скачать руководство пользователя страница 11

X7722279402

11

© 2/2016 ECHO Inc.

SRM-225

SAFETY

All over head electrical conductors and communications wires can
have electricity flow with high voltages. This unit is not insulated
against electrical current. Never touch wires directly or indirectly,
otherwise serious injury or death may result.

Do not operate this product indoors or in inadequately ventilated
areas. Engine exhaust contains poisonous emissions and can
cause serious injury or death.

Read the Manuals

• Provide all users of this equipment with the Operator’s Manual and Safety

Manual for instructions on Safe Operation.

Clear the Work Area

• Spectators and fellow workers must be warned, and children and animals

prevented from coming nearer than 15 m (50 ft.) while the unit is in use.

Keep a Firm Grip

• Always hold throttle handle and support handle with thumbs and fingers

tightly encircling the handles.

Keep a Solid Stance

• Maintain footing and balance at all times. Do not stand

on slippery, uneven or unstable surfaces. Do not work in
odd positions or on ladders. Do not over reach. For more
information scan the QR code.

Avoid Hot Surfaces

• Keep exhaust area clear of flammable

debris. Avoid contact during and
immediately after operation.

«
...
9
10
11
12
13
...
»

Содержание SRM-225





















































Отзывы:

Нет отзывов