Echo SRM-225 Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 52

Echo SRM-225 Скачать руководство пользователя страница 22

OPERATION

SRM-225

22

X7722279402

© 2/2016 ECHO Inc.

• Brush cutters over 7.5 kg (16.5 lbs.) dry weight (weight w/o fuel) require a

double shoulder harness.

Note: The Barrier Bar is used to restrict rearward movement of

the unit. The Barrier Bar is NOT A HANDLE and should
not be gripped when using or carrying the unit.

Blade Selection

The type of Blade used MUST be matched to the type and size of
material cut. An improper or dull blade can cause serious personal
injury. Blades MUST be sharp. Dull blades increase the chance of
kick-out and injury to yourself and bystanders.

Plastic/Nylon Grass/Weed
Blades

may be used where ever

the nylon line head is used. DO
NOT use this blade for heavy
weeds or brush!

8 Tooth Weed/Grass Blade

is

designed for grass, garden debris
and thick weeds up to 19 mm (3/4
in.) diameter. DO NOT use this
blade for brush or heavy woody
growth.

80 Tooth Brush Blade

is

designed for cutting brush and
woody growth up to 13 mm (1/2
in.) diameter.

22 Tooth Clearing Blade

is

designed for dense thickets and
saplings up to 64 mm (2-1/2 in.)
diameter.

«
...
20
21
22
23
24
...
»

Содержание SRM-225





















































Отзывы:

Нет отзывов