Echo SRM-225 Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 52

Echo SRM-225 Скачать руководство пользователя страница 23

X7722279402

23

© 2/2016 ECHO Inc.

SRM-225

OPERATION

Use Shoulder/Waist Harness

Use of the

Shoulder/Waist Harness is recommended
for

ALL

Trimmer/Brush Cutter use, not just

Blade operation. The Shoulder/Waist
Harness when used in a trimming operation
with nylon line head suspends the trimmer
from the operator's shoulder and reduces
operator fatigue.

During blade operation, the same fatigue
reduction is achieved. Safety to the operator is also
enhanced by reducing the possibility of blade contact with
the operator's hands and feet by restricting trimmer
movement. For more information scan the QR code.

Fuel

Diesel fuels and alternative fuels, such as E-15 (15% ethanol), E-85
(85% ethanol) or any fuels not meeting ECHO requirements are
NOT approved for use in ECHO 2-stroke gasoline engines. Use of
diesel or alternative fuels may cause performance problems, loss
of power, overheating, fuel vapor lock, and unintended machine
operation, including, but not limited to, improper clutch
engagement. Diesel or alternative fuels may also cause premature
deterioration of fuel lines, gaskets, carburetors and other engine
components.

Fuel Requirements

Gasoline

- Use 89 Octane [R+M/2] (mid grade or higher) gasoline known to be

good quality. Gasoline may contain up to 10% Ethanol (grain alcohol) or 15%
MTBE (methyl tertiary-butyl ether). Gasoline containing methanol (wood
alcohol) is

NOT

approved. ECHO brand Power Fuel

™

is 93 octane, ethanol-free

fuel premixed with ECHO Red Armor

®

engine oil at 50:1 ratio. Use of ECHO

Power Fuel

™

is recommended to extend engine life in all air-cooled 2-stroke

and 2/4-stroke hybrid engines.

Two Stroke Oil

- A two-stroke engine oil meeting ISO-L-EGD (ISO/CD 13738)

and J.A.S.O. FD Standards must be used. Echo brand premium Power Blend
X

™

Universal 2-Stroke Oil meets these standards. Engine problems due to

inadequate lubrication caused by failure to use an ISO-L-EGD (ISO/CD 13738)
and J.A.S.O. M345-FD certified oil, such as Echo premium Power Blend X

™

,

will void the two-stroke engine warranty.

«
...
21
22
23
24
25
...
»

Содержание SRM-225





















































Отзывы:

Нет отзывов