Echo Mona Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 83

Echo Mona Скачать руководство пользователя страница 9

9

like to check it out, then turn now to Appendix A: The Echo reporter
Software and follow the directions there. When you are done, return here.

System Sounds

There is one final step to perform before installing the Mona hardware. We
suggest that you turn off your Windows system sounds prior to installing
Mona. Because most system sounds are sampled at very low sample rates,
typically 8 to 11 KHz, each time they are played it will cause the sample
rate clock on Mona to reset to the slower speed

To turn off the system sounds, first go to the Windows Control Panel,
which can be found under Settings from the Start button. On the control
panel you will find an icon titled “Sounds”. After double clicking on this
icon, you will see a window labeled “Schemes” near the bottom of the
screen. Click on the small down arrow to the right of the combo-box and
select the “No Sounds” option. Then click on the Ok button.

Installing the Mona Hardware

Once you have verified that there are no problems with your system, it is
time to install Mona into your computer.

IMPORTANT - Unplug your computer and detach all peripherals before
proceeding with the following steps.

1. Remove your computer’s cover. This operation differs from computer to

computer. Refer to your computer’s manual for a further explanation of
this step if necessary.

2. Select the PCI slot into which you will install the Mona card. Inside your

computer you will likely find two types of expansion slots, ISA and PCI.
The PCI slots will be shorter and have a higher connector pin density than
the ISA slots. You may use any of the available PCI slots in your
computer for Mona. Unscrew and remove the bracket covering the
expansion slot where you would like to install Mona. Put the screw in a
safe place, as you will need it later to complete the installation.

«
...
7
8
9
10
11
...
»

Содержание Mona




















































































Отзывы:

Нет отзывов