6
5 INCH CHIPPER/SHREDDER/BLOWER
Section
2
ASSEMBLY
2.1 ATTACH CHIPPER EXTENSION (CE
COMPLIANT MODELS)
1. Slide the chipper extension into the chipper chute
aligning the mounting holes.
2. Secure using four 5/16 x 3/4" carriage bolts and
nylock nuts.
If any bolts or nuts are dropped in the machine, be
sure to remove them before starting the machine.
Remove items from the shredder area by removing the
discharge screen.
WARNING
Before inspecting or servicing any part of this machine,
shut off power source, disengage the hydraulics,
remove ignition key and make sure all moving parts
have come to a complete stop.
WARNING
2.2 ATTACH SHREDDER CHUTE & TRAY
1. Attach the shredder chute to the rotor housing using
eight 3/8 x 1" carriage bolts and nuts.
2. To access the lower mounting holes, open the access
cover of the rotor housing. See Figure 2.2.
3. Next, align the shredder chute tray on the shredder
chute so that the tray sits on top of the hinge. See
Figure 2.3.
4. Attach the shredder chute tray with the supplied four
5/16 x 3/4" carriage bolts and nylock nuts.
Figure 2.1, Chipper Chute Attachment
Figure 2.2, Shredder Chute Attachment to Housing
