26
GB
LET'S START
First use of the pot
Remove all labels and stickers from the product.
WARNING:
Before using, remove the container from the base and remove
all the styrofoam packaging material!
Before you start using the multifunctional pot, clean the removable container,
steam tray, frying basket, fondue forks, lid and all accessories using soft cloth
moistened in water with detergent. Rinse thoroughly and dry. Never immerse the
base in water – this could result in injury or damage to the appliance. Attach the
container with non-stick surface to the base with power supply, so that the tabs
fi t into the four holes in the metal surface of the base.
Note:
You may smell a faint odour when fi rst using the product caused by burning off of the new product. This is entirely
normal and disappears after you use it a few times. Therefore before fi rst use you can pour two cups of water in
the non-stick container and start the steam cooking mode. If necessary, repeat the process.
INSTRUCTIONS FOR USE
Control panel elements
Start/Stop button
•
You will hear a beep after connecting to power supply and LCD
display will light up. Select required function and press
Start/
Stop
to start the appliance. Press the button again to turn off the
appliance into standby mode.
Time/Temperature button and Increase and Decrease
(+ a -) buttons
• Press
Time/Temperature
once to set time: time on the display
starts fl ashing, which you can adjust using
+/-
buttons. Each time
you press, the time will increase/decrease by one minute. When
you press and hold
+
or
-
the time changes by 10 minutes. You can
set maximum time 9h 59min.
• Press
Time/Temperature
twice to set temperature: the
temperature on the display starts fl ashing and you can adjust it
using
+/-
buttons. Each time you press
+
or
-
, the temperature
changes by 10 degrees. The highest temperature setting is 240 °C,
the lowest is 50 °C.
Keep warm button
•
When you press this button, the indicator
Keep warm
lights up, the display shows temperature of 80 °C and the
time is set for 2 hours. When you press the button again, the indicator turns off and the appliance stops warming
the food and goes into standby mode. You can freely adjust the temperature and time during the warming process.
Function button
•
Allows you to set one of the preset modes, see chapter “Food preparation”.
Food preparation
Multifunction pot off ers 8 preset modes that you can go through by repeatedly pressing the
Menu
button. Each time
you press the
Menu
button, you choose successively from the following modes: Slow Cook –> Hot Pot –> Stir Fry
–> Boil –> Deep Fry –> Fry –> Grill –> Steam. When you press
Menu
and select the required function, the relevant
indicator lights up and fl ashes. Press the
Start/Stop
button to start heating, the indicator of the selected function stops
fl ashing and stays lit. You can adjust freely time and temperature while cooking. You cannot change the selected mode
after you start heating. If you want to change the mode, fi rst you have to press
Start/Stop
to switch the device into
standby mode and then again select the required mode.
Содержание MH 178 vario
Страница 67: ......
