ECG EHI 7125, Инструкция по эксплуатации

Страница: 41 / 52

41
GB
If the display fl ashes alternatively and the temperature data
It means that:
• The dishes are not placed in the correct cooking zone.
• Used dishes are not suitable for the induction heating.
• The pot is too small or it is not centered correctly on the cooking zone.
If there is no suitable pot or pan on the cooking zone the heating will not start and the display will automatically
shut off after 2 minutes.
Finishing cooking
Tap the proper button to select the cooking zone, which you want to switch
off .
Switch off the cooking zone by moving the fi nger over the power level
control to “0”.
Make sure that the display shows “0”.
Touch the ON/OFF switch to turn off the entire hob.
Hot surface warning.
The H symbol warns that the cooking zones are too hot to touch. When the
surface cools to a safe temperature, the symbol disappears. You can also use
this indicator to save energy: e.g. if you want to heat another pan, place it
on the still warm zone.
Using turbo power function
Turbo function activation
Tap the appropriate button to select the required cooking zone.
Press
B
to turn on the Turbo function, the indicator of the appropriate zone
shows “h” and the power increases to maximum.
Cancelling Turbo function
Touch the button of the zone where you want to cancel the Turbo function.
Press
B
to cancel the Turbo function, the zone returns to the original
setting.
• You can use this function for any cooking zone.
• The cooking zone returns to the original setting after 5 minutes.